You have no items in your shopping cart.
We can order these hoses in lengths, 2 to 40 feet.We stock the 16 and 18 ft lengths.These are the Kevlar hoses and notthestandard hydraulic hoses.If you need help selecting the steering system, the hose lengths, etc. call us, we've installed hundredsof these systems. We can even lend you the tools necessary for retro fitting your old boat tofit the hydraulic steering. Outboard hoses are supplied with pre-attached hose fittings on both ends. In order to prevent hose kinking, bend restrictors are supplied on one end of each hose in the kit. The end of the hose with the bend restrictor is to be attached to the cylinder. SeaStar Outboard hoses are available in kit's (includes two hoses) ranging in length from 2' - 30'. Hydraulic Hose must be protected from chaffing and any possible contact or interference with assembly screws or sharp edges of any type. The Hydraulic hoses should be secured along the routing path wherever possible and should not be allowed to hang free in any area where they could become a safety hazard. Teleflex recommends the use of a rigging tube, PVC piping or conduit for the safe secure installation of hydraulic hoses. Do not install hoses in such a way that they may become exposed to high heat areas such as engine components (i.e.; manifold or exhaust components) or highly corrosive areas such as battery fumes or electrical connections. Continuous kinking, chaffing, rubbing or twisting may eventually weaken hose(s) to a point where it could rupture from normal steering pressure causing loss of steering, resulting in personal or property damage. Visually inspect all hoses and fittings for wear and or damage as part of your regular annual maintenance. Replace any hose or components suspect of excessive wear.